Current position: Home > Shortcut to M > MTV Series

Transmit Positive Data Input. TTL input for a positive polarity pulse (the positive portion of the AMI pulse train) to be transmitted to the line via the TX DATA(+) and TX DATA(-) pins. Transmit Supply Voltage. 5V supply voltage to the transmit section.
PARAMETER VID Section DAC Output Voltage (Note 1) DAC Output Line Regulation DAC Output Temp Variation VID Input LO VID Input HI VID Input Internal Pull-Up Resistor to V5 Power Good Section Under-Voltage lower trip point Under-Voltage upper trip point UV Hysterises Over-Voltage upper trip point Over-Voltage lower trip point OV Hysteresis Power Good Output LO Power Good Output HI Soft-Start Section Soft-Start Current
The MTV030N-63 has internal EEPROM to store the two calibration points. The sensor acquires the signal from the electrode and calculates the PWM result using the two calibration points. The sensor can be calibrated via the two calibration inputs (see Section 4). The signal can be acquired either continuously or it can be synchronized on an external signal. The response time of the PWM depends largely on the acquisition burst spacing.